Published On: August 5ᵗʰ, 2019 19:03
Catalyst 6500 Series Switch Supervisor Engine Guide
Appendix A --- Pluggable Transceivers
Pluggable Transceivers
This appendix provides pointers and references for the pluggable optical and copper transceivers that are supported on the Catalyst 6500 series supervisor engine uplink ports.
Table A-1 lists the supervisor engine models and the transceiver types and quantities that they support.
Table A-1 Supervisor Engine Transceiver Support
|
Supervisor Engine
|
Number of Ports Supporting Transceivers
|
Transceiver Type Supported
|
|---|---|---|
|
Supervisor Engine 2 |
2 |
GBIC |
|
Supervisor Engine 32 |
8 |
SFP |
|
Supervisor Engine 32 |
2 |
XENPAK |
|
Supervisor Engine 720 |
2 |
SFP |
|
Supervisor Engine 720-10GE |
4 |
X2 or SFP+ (2 ports)1 SFP (2 ports) |
|
Supervisor Engine 2T |
5 |
X2 (2 ports) SFP (3 ports) |
|
1 A OneX Converter Module (CVR-X2-SFP10G) is required to install an SFP+ tranceiver in an X2 socket. |
For up to date information on which models of a specific type of transceiver are supported on a supervisor engine, refer to the transceiver compatibility matrices at the following url:
http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html
For transceiver installation and removal instructions, refer to the individual transceiver installation notes at the following url:
http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_installation_guides_list.html
To clean the optical connectors on transceivers and the fiber optic cable, use a CLETOP cassette cleaner and follow the product directions. If a CLETOP cassette cleaner is not available or if you want additional cleaning information, refer to the Inspection and Cleaning Procedures for Fiber-Optic Connections document at the following URL:
http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml
![]() |
Warning |
