Published On: August 6ᵗʰ, 2019 02:05
Cisco Enterprise Network Function Virtualization Infrastructure Software Command Reference
Secondary IP and Source Interface Commands
system settings wan secondary
To configure secondary IP on the WAN interface, use the system settings wan secondary command in global configuration mode.
system settings wan secondary ip address
Syntax Description
| ip address |
Specifies the IP address. |
Command Default
None
Command Modes
Global configuration mode
Command History
| Release | Modification |
|---|---|
| 3.5.1 |
This command was introduced. |
Examples
The following example configures the secondary WAN.
nfvis(config)# system settings wan secondary ip address 1.1.2.3 255.255.255.0
system settings source-interface
To configure source interface, use the system settings source-interface command in global configuration mode.
system settings source-interface ip address
Syntax Description
| ip address |
Specifies the IP address. |
Command Default
None
Command Modes
Global configuration mode
Command History
| Release | Modification |
|---|---|
| 3.5.1 |
This command was introduced. |
Examples
The following example configures the source interface.
nfvis(config)# system settings source-interface 1.1.2.3