Published On: August 6ᵗʰ, 2019 02:07

Cisco Enterprise Network Function Virtualization Infrastructure Software Command Reference

System Log Commands

system set-log

To set the log level and log type of messages, use the system set-log command in privileged EXEC mode.

system set-log level { debug | info | warning | error | critical } logtype { configuration | operational | all }

Syntax Description

level

Specifies the log level.
debug

Logs all messages.
info

Logs all messages that have info and higher severity level.
warning

Logs all messages that have warning and higher severity level.
error

Logs all messages that have error and higher severity level.
critical

Logs all messages that have critical severity level.
logtype

Specifies the log type.
configuration

Configuration log messages are recorded.
operational

Operational log messages are recorded.
all

All types of log messages are recorded.

Command Default

For the configuration log, info is the default level. For the operational log, warning is the default level.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.5.1

This command was introduced.

Usage Guidelines

After a system reboot, the modified logging configuration is reset to the default level, that is, info for the configuration log and warning for the operational log.

Examples

The following example shows how to configure a log level:

nfvis# system set-log level error logtype all

show system logging-level

To view the log level and log type settings, use the show system logging-level command in privileged EXEC mode.

show system logging-level [ configuration | operational ]

Syntax Description

configuration

(Optional) Log level for the configuration log type is displayed.
operational

(Optional) Log level for the operational log type is displayed.

Command Default

The log level for all log types is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.5.1

This command was introduced.

Examples

The following is a sample output of the show system logging-level command with the default log level settings:

nfvis# show system logging-level
system logging-level configuration info
system logging-level operational warning

show log

To display a list of available log files or content of a specific log file, use the show log command in privileged EXEC mode.

show log log-name

Syntax Description

log-name

Specifies the log file name. The log file name should be same as shown in the output of the show log command.

Command Default

None

Command Modes

Privileged EXEC mode

Command History

Release Modification

3.7.1

The log-name parameter is an optional parameter. When this parameter is not specified, a listing of all available log files is displayed. In addition, you can provide a partial or complete log file name (as shown in the show log output) in the log-name parameter.

3.6.1

The log-name is a required parameter.

3.5.1

This command was introduced.

Usage Guidelines

In Release 3.6.1 and earlier releases, the exact directory path (/var/log) and exact filename is required to run this command.

Starting with Release 3.7.1, this command is modified for the following:

  • Display a list of all available log files (using show log).

  • Display a list of log files that match the partial filename provided in the log-name parameter.

  • Display the content of the specified log file if the filename matches exactly as shown in show log output.

To filter the content of a log file, you can use the show log log-name | ? command.

Examples

The following example displays the available log files.

nfvis# show log
File Name              Last Modified                 Size 
backups.log            Mon Nov 13 10:30:01 2017      10758
boot.log               Mon Nov 13 10:51:25 2017      13893
btmp                   Mon Nov 13 10:26:21 2017      768
confd_audit.log        Mon Nov 13 11:05:35 2017      10423
confd_confd.log        Mon Nov 13 10:49:54 2017      20977
confd_devel.log        Mon Nov 13 10:49:54 2017      18969
confd.log              Mon Nov 13 10:48:58 2017      582
confd_netconf.log      Mon Nov 13 10:51:25 2017      1613
cron                   Mon Nov 13 11:01:01 2017      24762
...

Examples

The following examples display all available log files matching a partial name.

nfvis# show log nfvis
File Name              Last Modified                 Size 
nfvis_config.log       Mon Nov 13 10:51:25 2017      311395
nfvis_setup.log        Mon Nov 13 10:49:59 2017      3170
nfvis_syslog.log       Mon Nov 13 10:51:25 2017      1483


nfvis# show log esc 
File Name                   Last Modified                 Size 
esc/debug_yangesc.log       Mon Nov 13 10:49:53 2017      276748
esc/error_escmanager.log    Mon Nov 13 10:50:06 2017      11825
esc/esc_confd.log           Mon Nov 13 10:28:42 2017      588
esc/escmanager.log          Mon Nov 13 10:50:19 2017      44597
esc/esc_postinit.log        Mon Nov 13 10:50:25 2017      74940
esc/event_escmanager.log    Mon Nov 13 10:50:19 2017      4791
esc/forever.log             Mon Nov 13 10:49:07 2017      6892
esc/yangesc.log             Mon Nov 13 10:49:53 2017      23982

Examples

The following examples show the content of a particular log file.

nfvis# show log nfvis_syslog.log
Nov 13 09:50:35 nfvisto6 %SYS-6-NFVIS_UP: System started by Power Switch. Up 1 minute, 42 seconds
Nov 13 09:51:35 nfvisto6 %SYS-6-UPGRADE_APPLY: Upgrade Process: In Progress
Nov 13 09:51:36 nfvisto6 %SYS-6-UPGRADE_APPLY: Upgrade Process: Restoring VMs

Examples

The following example filters the content of a log file.

nfvis# show log esc/escmanager.log | ?
Possible completions:
  append    Append output text to a file
  begin     Begin with the line that matches
  count     Count the number of lines in the output
  exclude   Exclude lines that match
  include   Include lines that match
  linnum    Enumerate lines in the output
  more      Paginate output
  nomore    Suppress pagination
  save      Save output text to a file
  until     End with the line that matches

nfvis# show log esc/escmanager.log | include ERROR | more
02-Mar-2017 01:46:27,613 INFO  [LogContextService.java:outputDecoratedLog():185] [tid=] [cl=SM ]
[tags=threadName:VM_STATE_MACHINE-SystemAdminTena_demo7_0_8adb7f6a-ca5e-454d-9c14-fd9d5d21054f,stateMachineType:VM_STATE_MACHINE,
stateMachineContextId:
SystemAdminTena_demo7_0_8adb7f6a-ca5e-454d-9c14-fd9d5d21054f] VM_STATE_MACHINE-
SystemAdminTena_demo7_0_8adb7f6a-ca5e-454d-9c14-fd9d5d21054f Transition: VM_INERT_STATE ---- VM_ACTION_FAILED_EVENT ---- >
 VM_ERROR_STATE
02-Mar-2017 01:46:27,613 INFO  [ManagedObject.java:update():66] [tid=] [cl=DB ] [tags=] DB TRANSACTION(477010616) -
UPDATE VMStateMachineDao with values stateMachineContextId:SystemAdminTena_demo7_0_8adb7f6a-ca5e-454d-9c14-fd9d5d21054f; 
stateMachineType:VM_STATE_MACHINE; serviceStateMachineContextId:1a037a82-b248-4117-9156-aa26bc8e2ce1;
deploymentDetailsId:15fa65be-0775-47c3-aa46-d6eb1e428a93; previousState:VM_INERT_STATE; currentState:
VM_ERROR_STATE; monitorSet:true; serviceDefinition:0; vmInstance:demo7; vmIndex:0; 
classMetadata:SingleTableEntityPersister(com.cisco.esc.db.VMStateMachineDao); 
02-Mar-2017 01:46:27,669 ERROR [StateMachineEngine.java:buildLogContext():75] [tid=] [cl=SM ] [tags=]
Unable to set log context, null values found for RequestDetails
02-Mar-2017 01:46:27,673 INFO  [LogContextService.java:outputDecoratedLog():185] [tid=] [cl=SM ]
 [tags=threadName:RECOVERY_WORKFLOW_STATE_MACHINE-93cfacf5-9ee8-4e0e-9438-722944b4da2d,stateMachineType:
RECOVERY_WORKFLOW_STATE_MACHINE,stateMachineContextId:
93cfacf5-9ee8-4e0e-9438-722944b4da2d] RECOVERY_WORKFLOW_STATE_MACHINE-93cfacf5-9ee8-4e0e-9438-722--More--
...