Published On: August 6ᵗʰ, 2019 02:07
Cisco Enterprise Network Function Virtualization Infrastructure Software Command Reference
Banner and Message Commands
To configure a banner and message of the day (MOTD), use the banner-motd command in global configuration mode. To remove the banner or MOTD, use the no form of the command.
To verify the configuration, use the show running-config banner-motd command. To delete both the banner and the MOTD configuration, use the no banner-motd command without any keywords and arguments.
To display the system-defined banner, use the show banner-motd command in privileged EXEC mode.
show banner-motd [ system-banner ]
The system-defined banner.
The system-defined banner is displayed.
Privileged EXEC (#)
This command was introduced.
This command displays only the system-defined banner. It does not display the user-defined banner or message of the day.
The following is a sample output of the show banner-motd command:
nfvis# show banner-motd banner-motd system-banner "\nCisco Enterprise Network Function Virtualization Infrastructure Software (NFVIS)\n\nCopyright (c) 2015-2016 by Cisco Systems, Inc.\nCisco, Cisco Systems, and Cisco Systems logo are registered trademarks of Cisco\nSystems, Inc. and/or its affiliates in the U.S. and certain other countries. \n\nThe copyrights to certain works contained in this software are owned by other\nthird parties and used and distributed under third party license agreements.\nCertain components of this software are licensed under the GNU GPL 2.0, GPL 3.0,\nLGPL 2.1, LGPL 3.0 and AGPL 3.0.\n\n\n"
show running-config banner-motd
To display the configured banner and MOTD, use the show running-config banner-motd command in privileged EXEC mode.
(Optional) Specifies to display only banner information.
(Optional) Specifies to display only MOTD information.